Slideways and Wear Plates
Slideways through hardened up to 61 HRc, fully regrindable, maximum stability.
Wear Plates surface hardened up to 63 HRc - 25% hardened - 75% soft core. Material grade: CRG-10. The shock absorbing soft inner core and the surface hardened outer shell maximizes wear resistance. To avoid corrosion we do recommend our material grade JK stainless 25% hardened to 58-60 HRc - 75% soft inner core.
In the event of any questions or further information in regard of cutting and design applications, do not hesitate to contact us with your drawings.
Tolerance List for Slide Ways and Wear Plates:
| Terminology | Accuracy | |||||||||
| Hardness | HRC57-HRC 60 +/-2 | Parallelism | up to 0,005 mm | |||||||
| Dimensions / Dimensional Tolerances | Width +/- 0,01 | Thickness +/- 0,01 | Length | Flatness | 0,01/100 mm higher accuracy on request | |||||
| higher tolerances on request | Straightness | up to 0,005 mm | ||||||||
| Maximum One Piece Length | 6000 mm | Angularity | up to 0,005 mm | |||||||
| Compounded Length | unlimited | |||||||||
| Holes through hardened | up to 1000 mm Length | 0,5 mm | ||||||||
| 1000-2000 mm Length | 1,0 mm | |||||||||
| 2000-3000 mm Length | 1,5 mm | |||||||||
| over 3000 mm Length | 2,0 mm |
© 2012 dienes.de
